Zimmer + Rohde › Interesting facts › Infinity

Infinity

Care instructions

Care and cleaning properties

Due to the use of Hitex® fibres, Infinity Plus fabrics can be cleaned without using any special cleaning agents:
water-soluble stains can be removed with warm water and shampoo (80% of all household stains are water-soluble)
stains which are not water-soluble can be removed using solvents such as acetone
discolouring caused by crocking of other textiles can be removed with a diluted solution of chlorine bleach (e.g. discolouring caused by denim jeans or cotton trousers)

How to maintain the beauty of Infinity fabrics:
Do not place any sources of heat (heating pads, hot-water bottles, ashes, irons, hot liquids, etc.) on the fabric.
Lustrous sitting and pressure marks are a typical phenomenon of all pile fabrics. Therefore Infinity Plus and Phönix always have to be stored and transported in hanging condition!
Infinity Plus and Phönix must not be stored when folded. Cut-to-size pieces should be processed immediately to minimize the occurance of pressure marks or shiny areas.
Slight folds can be equalised by warming the affected area of Infinity with a hair dryer (60° C). Afterwards brush the pile with a soft clothbrush.
Do not try to scrape or pull off encrusted stains. First soften the encrustation and proceed with the stain removal to ensure the integrity of the pile.

Back to top